Step 2: Take the table legs and screw the silver nuts onto each of them as shown.
Step 3: Slide the table leg into the corner holes of the TT-1 and thread the black nuts until the thread of the leg is flush with the top of the nut. Next, tighten the silver nut up against the bottom of the TT-1 to secure the legs.
Step 4: Take the phantom limb (articulating arm) and screw it to whatever corner hole you find most useful for the wiring you plan to do and tighten.
Step 5: Set up your first project and enjoy the simplicity and versatility of the TT-1! More products coming soon!
